Vintage Drag Racing Model Cars & Parts !
***** COMING SOON ******
We
are constantly working on many new projects
so keep checking back .
.......................................................................................................................
WOULD YOU LIKE TO SEE THIS CAST IN RESIN ?
ED ROTH'S MAILBOX CHOPPER
I built this for myself, but have had some interest in it from others !
IF CASTED.............. THE RESIN PARTS WOULD INCLUDE:
1. Correct body (unlike the reissued model kit which is nothing like the real body ) !
2. 4 cly Crosley engine & valve cover
3. Correct tuck & roll pleated seat
4. Taillights
5. Rear box frame section
( You will need to modify your own frame & gas tank from the re-issued Ed Roth Mailbox chopper model kit )
PLEASE EMAIL US FOR YOUR COMMENTS: skmodeler@sbcglobal.net
.......................................................................................................................
....................................... COMING SOON........................................
'66 LONG NOSE BARRACUDA FUNNY CAR
Master by Ron Ramsey
Ron Ramsey, a great modeler and friend, has decided to help us with a project .....
So we asked him to share some "in-progress" photos with us.
Ron, is still working on the Interior tub and Chassis.
I have seen this Long Nose Barracuda in hand, and it is beautiful !!!
Thank you, Ron
The YANKEE PEDDLER & SOX & MARTIN shown in the last 2 photos,
are the smaller body version, they can be built by removing 12 scale inches / or a ( 1/2" ) from the front clip & chassis.
....................................... COMING SOON ........................................
"FLYING DUTCHMAN" CHARGER III F/C
This is not a direct copy of the MPC kit, but is Re-Mastered to an accurate body !
Resin
kit comes with Accurate: Body, Floor Pan, Interior Tin, Fire wall, Rear
Hinge, 2- Frame Rails, Splash Pan, Rear Valence,
&
Roll Bar.
#SC- 12 ...... $45.00
................................. COMING SOON .................................
1966/67 OLDS 442 A/FX
Lutz & Lundburg's "442 MUCH"
Being Mastered by Paul Mendosa
....................................................................................................................................................................
NEW DRAG WHEELS
************************* "COMING SOON" *************************
Our Mag Wheels will actually have a "Mounting Hub", unlike other casters who cut them off,
and then you have to spend hours trying to add them from another mag wheel !!!....???
We will also be adding the Inner Rims with our "Shallow" Drag Wheels !
Halibrand Drag Wheels
( Front or Rear ) ............ "COMING SOON"
American Racing "Shallow Front" Drag Wheels ............
"COMING SOON"
American Racing "Deep Dish" Drag Wheels ............
"COMING SOON"
Daisy "Deep Dish
Rear" Drag Wheels ............ "COMING SOON"
Fenton Gyro "Shallow Front" Drag Wheels ............ "COMING
SOON"
Our Mag Wheels will actually have a "Mounting Hub" to put an axle into !
We will also be adding the Inner Rims with our "Shallow" Drag Wheels !
Let us know if there are other mags you think we should cast ?
..................................................................................................................................................................
NEW DRAG SLICKS & TIRES
************************* "COMING SOON" *************************
We will be re-casting the amt. original "plastic" Funny Car Slicks & Tires in Black rubber !
These were some of the most accurate Drag Slicks & Racing tires made for Early Funny Cars, unfortunately they were Plastic !
1. amt. Funny Car "GOOD YEAR" Slicks
2. amt. Funny Car "RACEMASTER DRAGSTER" Slicks
3. amt. Funny Car front "Skinny Racing Tires".
4. LOW PROFILE / 10" WIDE AFX DRAG SLICK
( smaller Diameter slicks to fit inside a stock wheel well, but still 10" wide ).
These Slicks have a Lower Profile than any other slick made, and will fit when all other slicks are to tall in diameter.
Goes great with earlier AFX cars, such as '65 Plymouth, '65/'66Chevelle, '66 Nova, '66 Corvair, Etc.
The original plastic slick had a Wheel back on the rear side, after casting a few, 2 slicks were cut in halfs and were re-glued for a new master !
These NEW Slicks will be cast in rubber !!!
When I built the ALAN GREEN Fastback Chevy, NO SLICKS WOULD FIT IT CORRECTLY, so I created these for myself, Realizing that our new '65 Plymouth AFX will also need these slicks, We will be offering them to you soon !
...................................................................................................................
1965 DODGE CORONET A/FX (HardTop )
The '65 Coronet
A/FX will be designed from 2 original amt. bodies !
Dont
worry, only one was worth saving, the other will be for patch panels.
Work has already been started and will have NEW .... Corrected Tail Lights,
Single & Double head light grills, New Window & Door Trim.
Resin kit also include: Altered Wheel Base Chassis, Interior tub & '65 Coronet Dash.
As soon as this gets finished, We will be doing the '65 Dodge Coronet Sedan A/FX also !!!
