WHEN YOU DEMAND HIGH QUALITY AND ACCURACY, GO WITH........ SPEED CITY !
"ENGINE PARTS"
* All parts are 1/25 Scale *
* Clean parts with "Westley's Bleach White" or "Castrol Super Clean" before painting *
 |
TO GET A POLISHED ALUMINUM LOOK
Paint parts with RUST-OLEUM BRIGHT COAT METALLIC FINISH "CHROME" #7718 spray paint.
This paint can be used on all tin work as well and looks more realistic than metallic silver.
(OR)
MODEL MASTER Aluminum Plate Buffing Metalizer (now in rattle can) #1451
*Buff painted part with a Q-Tip*
TO GET A CHROME PLATED LOOK
We were the first to bring news of Molotow Chrome a few years back.
Since then, there are now several different Chrome ink manufactures.
Apply chrome ink directly over clean bare plastic or resin..... No need to have a black undercoating.
No need to thin, just pour into air brush cup and spray a heavy coat !
(Clean air brush with rubbing alcohol)
BIG BLOCK CHEVY ENGINE
396-427
#SC-116 ........ $11.00
OUT OF STOCK, DO NOT ORDER !
Parts include: 1-Piece Engine Block - Heads -
Stock Valve Covers -
Cragar Blower Manifold (with Burst Plate) - Finned Timing Cover - Oil Pan.
Based on a factory 1965-1969 BBC Engine.
Designed for Blown or Injected Racing Engines.
This engine can be used for a stock engine by adding a;
Water Pump, Fan/Belt, Oil Filter, Intake, Carburator & Air Cleaner.
Heads can also be painted silver to replicate "Aluminum 427 Rat Heads"
We have a new G.M. TURBO-HYDRAMATIC 400 Transmission to go with this engine below.
Our "CHEVY HILBORN INJECTION MANIFOLD" and "INJECTION STACKS" can be found at the bottom of this page.
Other engine parts can be found in our "FUNNY CAR PARTS PACK" and our "AFX PARTS PACK" at the bottom of this page.
To see how the master was created, visit the "IN PROGRESS" page.
This
item was semi-scratch built by 
......
NOT copied from a kit !
426 HEMI ENGINE
OUT OF STOCK, DO NOT ORDER !
Parts include: 1- Piece Engine Block (with Motor Mounts) - Heads - Finned Timing Cover -
Cragar Blower Manifold (with Burst Plate) - Oil Pan.
Based on a factory 1964-1971 Hemi Engine.
Designed for Blown or Injected Racing Engines.
This engine can be used for a stock engine by adding a;
Water Pump, Fan/Belt, Oil Filter, Intake Manifold, Carburator & Air Cleaner.
Heads can also be painted silver to replicate "Aluminum Heads".
Our "HEMI HILBORN INJECTION MANIFOLD" and "INJECTION STACKS" can be found at the bottom of this page.
*The lip on the sides of the Hemi Hilborn Manifold will need to be filed down to fit this 426 Engine*
Other engine parts can be found in our "FUNNY CAR PARTS PACK" and our "AFX PART PACK" at the bottom of this page.
To see how the master was created, go to the "IN PROGRESS" page.
This
item was semi-scratch built by ......
NOT copied from a kit !
- NEW & IMPROVED -
392 HEMI ENGINE
#SC-66........ $11.00
Parts include: 1-Piece Engine Block - Heads (with Water Filler Tubes) - M/T Finned Valley Pan -
M/T Finned Timing Cover - Blower Manifold (with Burst Plate) - Oil Pan.
Designed for Blown or Injected Racing Engines.
This engine can be used for a stock engine by adding a
Water Pump, Fan/Belt, Oil Filter, Intake, Carburator & Air Cleaner.
Our "HEMI HILBORN INJECTION MANIFOLD" and "INJECTION STACKS" can be found at the bottom of this page.
To fit a Hemi Hilborn Inj. Manifold to a 392 Hemi engine:
Remove the center section (valley pan) from our " Hemi Hilborn" manifold and glue the two side halfs to the heads.
Other engine parts can be found in our "FUNNY CAR PARTS PACK" and our "AFX PART PACK" at the bottom of this page.
To see how the master was created, go to the "IN PROGRESS" page.
This item was semi-scratch built by ...... NOT a copied kit part !
HEADER COLLECTORS & FLANGES
(for big block engines)
#SC-103 ........ $4.00
OUT OF STOCK, DO NOT ORDER !
These parts can be used to enhance your model kit headers.
-or-
you can use these parts to scratch build your own headers using solder for tubes.
TO MAKE HEADER TUBES FROM SOLDER:
Because solder tubes are heavier than plastic,
you will need to make mounting pins for a better bond to your engine.
Here's how.....
1. You'll need standard size paper clips, a wire cutter and 4 OZ. (113g) rosin core solder.
2. Place the flange on engine head and drill holes through flange holes and into the
engine head to fit the paper clip pieces to be used as "mounting pins".
(Chevy & Pontiac will need the center tubes re-drilled more towards the center)
3. Heat the paper clip end and push hot end into the center of the rosin core solder.
4. Cut off paper clip end, so only a 1/4" is showing from the solder tube.
5. Bend each tube to your desire to meet up with the collector.
6. You can pre-drill the 4 collector holes to seat the header tube ends for a solid fit.
7. Once you finished with aligning all the headers, super glue all the header tubes into the flange.
Here's a
"HOW TO" article from Ron Ramsay in Scale Auto April 2017
These headers were made by gluing pre-cut solder pieces into the resin Collectors first,
bending and cutting them to the desired shape & length,
heating paper clip rods into the solder ends and then gluing them into the resin Flanges.
This item was semi-scratch built by ...... NOT a copied kit part !
TRANSMISSIONS
727 TORQUEFLITE
* Short Tail *
#SC- 119....... $7.00
The most popular Mopar transmission used in drag racing due to their great strength.
G.M. TURBO-HYDRAMATIC 400
#SC-117....... $7.00
Comes with: Transmission & separate pan.
The G.M. bolt pattern is compatible with Buick, Olds, Pontiac & Cadillac engines.
The most popular G.M. transmission used in drag racing due to their great reliability.
DIRECT DRIVE BELL HOUSING
Use 3/16" Aluminum Tube for Drive Train Tunnel.
Based on a "HENRY'S DIRECT DRIVE UNIT"
This
item was scratch built by ...... NOT a copied kit part !
VALVE
COVERS
All valve covers are cast hollow
M/T (SMALL BLOCK) CHEVY VALVE COVERS
fits - 283 - 327 - 350
#SC-81 ....... 5.00
To see how this master was created, check out the "IN PROGRESS" page.
This
item was scratch built by ...... NOT a copied kit part !
M/T BIG BLOCK
CHEVY PARTS PACK
396 - 427
#SC-63 ........ $8.00
This
item was scratch built by ......
NOT a copied kit part !
M/T
392 HEMI VALVE COVERS
with
Dual Breathers
#SC-50
........ $6.00
This
item was scratch built by ...... NOT a copied kit part !
426 HEMI (stock) VALVE COVERS
with Dual Breathers
#SC-120....... $5.50
Comes with: Stock Hemi Valve Covers (with breather tubes) & 2- separate Oil Caps.
( Boots & Breather Tubes have been pre-drilled )
Spray with your choice of Chrome Ink / Paint for a realistic look.
This
item was semi-scratch built by ...... NOT a copied kit part !
M/T
426 HEMI (FINNED) VALVE COVERS
with Dual Breathers
#SC-51
........ $6.00
The only correct HEMI
HILBORN Injected Manifold ever made.
* with correct curved ports *
Fits almost every 1/25 scale HEMI Engine.
(may need minor adjustments to manifold or heads on some engines).
- To fit a 392 Hemi -
Remove the center section (valley pan) from the manifold. Glue the valley pan to center and glue the two side half's to the heads.
15" - 10" - 7" Injection Stacks are sold separately at the bottom of this page.
This
item was scratch built by ....... NOT a copied kit part !
CHEVY HILBORN
Injection Manifold
396 - 427
#SC-6 ..... $6.00
OUT OF STOCK, DO NOT ORDER !
The only correct Big Block Chevy Hilborn Injected Manifold ever made.
* with correct offset & curved ports *
Fits almost every 1/25 scale BBC Engine.
(may need minor adjustments to manifold or heads on some engines).
This is an accurate replacement for the incorrect AMT Chevy II and Tempest Funny Cars.
15" - 10" - 7" Injection Stacks are sold separately at the bottom of this page.
This
item was semi-scratch built by ......
NOT a copied kit part !
CHEVY HILBORN
(small block)
Injection Manifold
fits- 289 - 327 - 350
#SC-78 ........ $6.00
OUT OF STOCK, DO NOT ORDER !
This new Manifold has been sized to fit several different Chevy and Corvette engines,
including the Model King Chevy II & Tempest Funny Cars.
(Even though those engines are closer to a 327 - 350 engine)
15" - 10" - 7" Injection Stacks are sold separately at the bottom of this page.
This
item was scratch built by ...... NOT a copied kit part !
This Enderle Injection Manifold fits 396 - 427 Big Block Chevy engines.
* This is the first and only time an Enderle Injection has ever been offered *
To see how this master was created, go to the "IN PROGRESS" page.
This item was scratch built by .......
NOT a copied kit part !
FORD (small block) INJECTION
*PARTS PACK*
#SC-105 ........ $12.00
Parts Include: Injection manifold - Timing Cover - 2"x 6" Injection Stacks
(Fits: 289 - 302 - 351)
No model company ever made a Ford (small block) injection manifold or timing cover....... Until now !
New Injection stacks were designed to fit the smaller throttle bodies on this manifold.
Try something different on your next Drag Car, Sleeper, Street Machine, Custom, Show Car, Rat Rod, Etc.
* Visit the "IN PROGRESS" page to see the extensive work that was done to this new item *
This
item was scratch built by ......
NOT a copied kit part !
FORD 427 WEDGE INJECTION
*PARTS PACK*
#SC-115 ........ $12.00
Parts Include: Injection Manifold - M/T Finned Valve Covers - Timing Cover.
No model company ever made a Ford 427 Fuel Injection set up (or) Ford 427 M/T valve covers...... Until now !
Think of all the possibilities for so many different Ford projects.
Rail Dragster, Early Funny Car, Sleeper Street Machine, Hot Rod, Rat Rod, Altered, Show Car, Etc.
15" - 10" - 7" "INJECTION STACKS" can be found at the bottom of this page.
-This set up does not work on SOHC engines-
* Visit the "IN PROGRESS" page to see the extensive work that was done to this new item *
This
item was scratch built by ...... NOT a copied kit part !
GMC 6-71 BLOWER
#SC-110 ........ $6.00
Parts include: Blower Case - Rear Bearing Plate - Front Drive Plate.
This
item was semi-scratch built by ......
NOT copied from a kit !
SCOTT "SUPER SLOT" INJECTION
OUT OF STOCK, DO NOT ORDER !
Comes with: 2-Piece Scoop and Base (never offered in kit form).
Apply a thin bead of super glue (with a tooth pick) to the scoop edges and reshape to a sharp edge.
To
see how this master was created, go to the "IN PROGRESS" page.
This item was scratch built by .......
a copiedkit part !
ENDERLE BUG CATCHER
*Parts Pack*
#SC-74 ......... $9.00
OUT OF STOCK, DO NOT ORDER !
Comes with: Top (ribbed) Blower Hat, Bottom Hat (with butterflies, throttle rod, mounting base w/ bolt heads,
Barrel Valve (with Linkage), Adaptor Base Plate (with fuel line bolt heads).
With this new "Parts Pack" you can do 3 different style Enderle set up's.
Shown below are 3 different combinations.
ENDERLE "SHOWER HEAD"- (Adaptor Base Plate not required).
ENDERLE WITH RUBBER HOSES- (Adaptor Base used with Rubber Fuel Lines).
ENDERLE WITH METAL LINES- (Adaptor Base used with Metal Fuel Lines).
This
item was semi-scratch built by ......
NOT a copied kit part.
To see how this item was created, go to the "IN PROGRESS" page.
HILBORN BUG CATCHER
with Base
#SC-69 ........ $5.50
Comes with: Blower Hat and Base (never offered in kit form).
This
item was semi-scratch built by ......
NOT a copied kit part !
CROWER BUG CATCHER
with Base
#SC-70........ $5.50
Comes with: Blower Hat (with new Butterflies & Throttle Rod) and Base (never offered in kit form).
This item was semi-scratch built by ......
NOT a copied kit part !
RIBBED BLOWER BELT
*Black Rubber*
Belt can go inside or outside the idler pulley !
Pulleys shown are from our "Funny Car Parts Pack" #SC-64.
#SC-83........ $3.00
1. Trim excess flash off belt with a thin hair scissors..... (do not tear off, as it could damage part).
2. If belt is too long.... Cut the bottom of the belt, remove excess and glue to the bottom pulley.
This
item was semi-scratch built by ...... NOT a copied kit part !
AFX PARTS PACK
#SC-7 ...... $10.00
We came up with a solution for all the hard to find parts you'll need when building your drag car.
We picked the best detail parts we could find, and some others that had to be scratch built !
Parts included with this package:
2 - Wheelie Casters
* Pushbutton Transmission Console
(with toggle switch & starter button)
Tachometer
Gas Cap
* Water Cooler Tank
2- Block out Headlight Covers
Timing Chain Cover
Fuel Pump
Brake Cylinder
* Timing / Balancer Pulley
Steering Box
* These items were scratch built by .......
NOT a copied kit part !
FUNNY CAR PARTS PACK
OUT OF STOCK, DO NOT ORDER !
Parts included with this package:
2- Airheart Disk Brakes with Rotors
* 3- Blower Pulleys with Ribs & Bolt Heads
* Idler Adjustment Arm
* 392 Hemi Timing Cover
Mallory Super Coil
3- Gauge Cluster on Rack
Correct looking Fire Extinguisher
* 4 Port Injector Base
Oil Filter with adapter
Transmission Linkage
* These items were semi-scratch built by .......
NOT a copied kit part !
INJECTOR TUBES
15" Hollow Tube Injector Stacks
#SC-24 ....... $4.00
ORDER AS MANY AS YOU WANT.... NO LIMIT !
8- SILVER PLATED COPPER HOLLOW TUBES
These are the same size as most typical model kit stacks !
Injector stacks are shown on our HEMI HILBORN MANIFOLD !
10" Hollow Tube Injector Stacks
#SC-25 ....... $4.00
NO LIMIT !
8 - SILVER PLATED COPPER HOLLOW TUBES
Injector
stacks are shown on our HEMI HILBORN MANIFOLD !
7" Hollow Tube Injector Stacks
#SC-26....... $4.00
NO LIMIT !
6" Hollow Tube Injector Stacks
#SC-86 ........ $4.00
NO LIMIT !
8 - SILVER PLATED COPPER HOLLOW TUBES
To be used mainly on Buick Nail Head Engines.
These can also be used for exhaust tips, Spark Plug Holes on Valve Covers or whatever else you can dream up?
Stacks are shown on a Revell Tommy Ivo "Showboat" Dragster Nail Head Engine.
*** These 6" stacks will not fit on any Speed City Injection Manifolds ***
All rights reserved. Do not copy any Speed City Resin bodies or parts without permission and consent.