WHEN YOU DEMAND HIGH QUALITY AND ACCURACY, GO WITH........ SPEED CITY !

MOPAR
FORD
MISC
PARTS
GM
DRAGSTER
 
Testimonials
Model Gallery
In Progress
Coming Soon
Model News
Order Form
Contact Us
Want's
Links
 

"MOPAR MODELS"
Dodge - Plymouth - Chrysler

Solution Graphics



 

FRED HURST
1967 BARRACUDA GASSER




#SC-107 ........ $46.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct Body, Interior Tub, Chassis, Rear Bumper & 2- Wheelie Wheels.

Recommended donor parts for a correct build:
#SC-118 Drag Racing Driver Figure #1
#SC-90 Chrysler Dana 60 Rear End
#SC-98 M&H Racemaster 16" Drag Slicks
#SC-85 American "TORQUE THRUST" 16" Deep Dish Mags
#SC-87  Inner Rims (deep dish)
#SC-108 Torque Thrust "Spindle Mount" Mag Wheels
#SC-109 426 Hemi Engine
#SC-5 Hemi Hilborn Intake Manifold
#SC-25 10" Injector Stacks
#SC-005 Hood Pins Decal
#SC-103 Drag Racing Driver Figure

> Use Revell Stone, Wood's & Cook Willys Gasser as donor.

> Revell Miss Deal for: Skinny front tires & straight tube headers (if building the later version).

> Use clear sheet acetate for all glass.
Because glass is flush mounted on front & rear windows-
use masking tape over those windows and cut along recessed window frame.
put tape on clear sheet and cut out with scissors. Test fit and trim as necessary.
Use Testors Clear Parts Cement (and spots of super glue to all corners) to glue front & rear windows down.

*TIPS ON PAINTING THE INTERIOR TUB*
1. Super Glue tooth pick to outside of interior tub (to be used as a handle).
2. Spray entire Interior Tub with a primer coat.
3. Paint all padded door panels & rear backseat (tuck 'n' roll) padding - a white base coat followed by a pearl white coat (and) Silver Metal flake.
* Make sure to paint the seats at this time too*
4. After painting all pearl & flake, tape off center of (tuck 'n' roll) in backseat area, the flat padding on door panels, sail panel & seat centers with Bare Metal Foil.
5. Air brush candy red over all the padded "unmasked area's" (let paint cure).
6. Leave all masking on and put more Bare Metal Foil over all the painted door panels and all backseat tuck 'n' roll areas.
7. Now spray dash, floors and seats with a silver base, followed by candy red.
8. Remove all tape and clear coat entire Interior Tub (top & bottom) and seats.

Here's the Interior
after painting.

Fred Hurst Barracuda decals.

Scott Kapellusch built this from a resin model.


 

1967-'68 BARRACUDA FUNNY CAR





The first and only correct '67-'68 Barracuda F/C in model history, never before seen in model kit form..... until now !
Our goal was to give you an accurate body to represent the cars shown above.

The Polar Lights Barracuda F/C body is NOT correct for any of these cars or even what they show on some of their box art.

None of these Barracuda Funny Cars shown had stretched bodies, only an altered front wheelbase & wider rear wheel wells.
Check the "IN PROGRESS" page to see the extensive work that was done to make this model.

With all our extra body parts, there are more than 30 ways to build this Speed City Resin Model.


#SC-53 ........ $44.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

 Resin model includes:
* Correct AWB '67 -'68 Barracuda Funny Car Body
* Two separate style Front Spoiler's
* Separate Rear Air Foil
* Stock Grills with block out headlights
* Angled Grill Block outs
* Separate Bumpers

*Check out our "PARTS PAGE" for any Tires, Slicks, Mag Wheels, Rear End, Driver Figure or other parts you may need.

*To build some cars you may need to Hog-out or Flare the rear wheel well.

*We thought of doing a "RAKED ROOF VERSION", but all the roofs are raked differently.
*To rake the roof, you will need to cut & re-set the A-Pillars (windshield posts).
*Back up the cut post with a piece of paper clip, stainless steel or piano wire (found at hobby stores) for strength !

*A Polar Lights Barracuda or Charger F/C will be needed for a donor kit (but will need to be shortened just before the engine).

CANDIES & HUGHES decal
TOM McEWEN decal
SUPER CUDA decal
CHI-TOWN HUSTLER decal (decal will need to be cut shorter at the door line to fit)
FLINTSTONE FLYER decals to fit this body.
FRED GOESKE decals to fit this body.
KING FISH Barracuda decal .............
Jim Polli built this from a resin model.


 

1965 DODGE CORONET HARDTOP A/FX





" We guarantee this to be the only correct '65 Coronet Hardtop A/FX ever offered "

#SC-35 ..... $
56.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB Body, (with corrected window & door trim and Tail Lights), Hood, A.W.B. Chassis,
Interior tub, Coronet Da
sh, Single Headlight grill and Double Headlight grill (w/ block-out head lights), Front & Rear Bumpers.

Recommended donor parts:
#SC-109 426 Hemi Engine
#SC-118 Drag Racing Driver Figure #1 (for the original AFX cars)
#SC-102 Drag Racing Driver Figure #2
#SC-90 Chrysler Dana 60 Rear End (for factory built AFX cars)
#SC-55 Front Leaf Spring Assortment Pack (for none factory cars)
#SC-45 AFX (low profile) Blue Streak Drag Slicks
#SC-40 American Racing 15" Rear Mag Wheels
#SC-87  Inner Rims (deep dish)
#SC-72 AFX - Super Stock Skinny Front Tires

#SC-39 American 5 Spoke Front Mag Wheels
#SC-82 A-100 Lightweight Super Stock Seats
#SC-7 AFX Parts Pack
#SC-64 Funny Car Parts Pack
#SC-24- 25 or 26 15"-10" or 7" Hollow Tube Injector Stacks

*You can set the height of the front end by adding plastic blocks as "risers" to the kit suspension or frame, or use a
dropped axle (that most of the cars used), from a Revell '51 Ford Anglia, '51 Henry J, '29 Ford or Custom pick up, kit.
* Use the AMT '65 Dodge Coronet "SNAP-KIT" for a donor.
*A hood scoop ( if needed ) can be found in the Lindburg '64 Dodge Ramchargers kit *

Mr. NORMS Red & Sliver Coronet decals.

DICK LANDY Coronet decals.

DICK LANDY'S Coronet AFX. decals

Contact Nikki at: poppawheelie65@yahoo.com for the "RAMCHARGERS" decal.

Contact Nikki at: poppawheelie65@yahoo.com for the "HONKER" decal

Gary E. Kennedy built this from a resin model.

Roger Isenhouer built this from a resin model.
(His first AWB model) Used Lindburg '64 Dodge Ramcharger decals.

Doug Schultz built this from a resin model.


 

1965 DODGE CORONET SEDAN A/FX





" We guarantee this to be the only correct '65 Dodge Coronet Sedan A/FX ever offered "


#SC- 47 ...... $56.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB Body, (with corrected window & door trim and Tail Lights), Hood, A.W.B. Chassis,
Interior tub, Coronet Dash, Single Headlight grill and Double Headlight grill (w/ block-out head lights), Front & Rear Bumpers.

Recommended donor parts:
#SC-109 426 Hemi Engine
#SC-118 Drag Racing Driver Figure #1 (for the original AFX cars)
#SC-103 Drag Racing Driver Figure #2
#SC-55 Front Leaf Spring Assortment Pack (for none factory cars)
#SC-45 AFX (low profile) Blue Streak Drag Slicks
#SC-40 American Racing 15" Rear Mag Wheels
#SC-87  Inner Rims (deep dish)
#SC-72 AFX - Super Stock Skinny Front Tires
#SC-39 American 5 Spoke Front Mag Wheels

#SC-82 A-100 Lightweight Super Stock Seats
#SC-7 AFX Parts Pack
#SC-64 Funny Car Parts Pack
#SC-24- 25 or 26 15"-10" or 7" Hollow Tube Injector Stacks

*You can set the height of the front end by adding plastic blocks as "risers" to the kit suspension or frame, or use a
dropped axle (most of the cars used), from a Revell '51 Ford Anglia, '51 Henry J, '29 Ford or Custom pick up kit.

* Use the AMT '65 Dodge Coronet "SNAP-KIT" for a donor.
*A hood scoop ( if needed ) can be found in the Lindburg '64 Dodge Ramchargers kit *

Contact Nikki at: poppawheelie65@yahoo.com for The "TENSION" decal.... Also on eBay !

Scott Kapellusch built this from a resin model.

Rick Shepard built this from a resin model.



History of the AFX Funny Cars


click on photo



 

1965 PLYMOUTH BELVEDERE A/FX




" We guarantee this to be the only correct '65 Plymouth Hardtop A/FX ever offered "


#SC-15 ....... $
56.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB '65 Ply Body, Chassis, Hood, Interior tub, Dash,
&Rear Bumpers & Taillights.

Recommended donor parts:
#SC-109 426 Hemi Engine
#SC-118 Drag Racing Driver Figure #1 (for the original AFX cars)
#SC-103 Drag Racing Driver Figure #2
#SC-90 Chrysler Dana 60 Rear End (for factory built AFX cars)
#SC-55 Front Leaf Spring Assortment Pack (for none factory cars)
#SC-45 AFX (low profile) Blue Streak Drag Slicks
#SC-40 American Racing 15" Rear Mag Wheels
#SC-87  Inner Rims (deep dish)
#SC-72 AFX - Super Stock Skinny Front Tires

#SC-39 American 5 Spoke Front Mag Wheels
#SC-82 A-100 Lightweight Super Stock Seats
#SC-7 AFX Parts Pack
#SC-64 Funny Car Parts Pack
#SC-24- 25 or 26 15"-10" or 7" Hollow Tube Injector Stacks

*Use any Lindburg '64 Plymouth or '64 Dodge for a donor kit. (The Dodge works best for firewall and inner wheel wells).
*A hood scoop ( if needed ) can be found in the Lindburg '64 Dodge Ramchargers kit *

*You can set the height of the front end by adding plastic blocks as "risers" to the kit suspension, or use a
dropped axle from a Revell '51 Ford Angelia, '51 Henry J, '29 Ford or Custom pick up kit.

Has the SOX & MARTIN GATE CITY decal.

Southern Motorsports Hobbies has the SOX & MARTIN GATE CITY decal in stock at this time.

*Contact
Nikki at:
poppawheelie65@yahoo.com for The "Maloney Plymouth" decal.... Also on eBay !

*Contact Nikki at: poppawheelie65@yahoo.com for The "Golden Commandos" decal..... Also on eBay !

Cecil Yothers MELROSE MISSILE decals for this kit.

Doug Schultz built this from a resin model.

Ron Ramsay built this from a resin model.


 

1965 PLYMOUTH SEDAN A/FX




" We guarantee this to be the only correct '65 Plymouth Sedan A/FX ever offered "


#SC-33 ..... $
56.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB '65 Ply Body, Chassis, Hood, Interior tub, Dash,
Separate Grill (w/ block-out head lights), Front & Rear Bumpers & Taillights.

Recommended donor parts:
#SC-109 426 Hemi Engine
#SC-118 Drag Racing Driver Figure #1 (for the original AFX cars)
#SC-102 Drag Racing Driver Figure #2
#SC-90 Chrysler Dana 60 Rear End (for factory built AFX cars)
#SC-55 Front Leaf Spring Assortment Pack (for none factory cars)
#SC-45 AFX (low profile) Blue Streak Drag Slicks
#SC-40 American Racing 15" Rear Mag Wheels
#SC-87  Inner Rims (deep dish)
#SC-72 AFX - Super Stock Skinny Front Tires

#SC-39 American 5 Spoke Front Mag Wheels
#SC-82 A-100 Lightweight Super Stock Seats
#SC-7 AFX Parts Pack
#SC-64 Funny Car Parts Pack
#SC-24- 25 or 26 15"-10" or 7" Hollow Tube Injector Stacks

*Use any Lindburg '64 Plymouth / '64 Dodge for a donor kit. (The Dodge works best for firewall and inner wheel wells).
*A hood scoop ( if needed ) can be found in the Lindburg '64 Dodge Ramchargers kit *

*You can set the height of the front end by adding plastic blocks as "risers" to the kit suspension (Frame), or use a
dropped axle from a Revell '51 Ford Angelia, '51 Henry J, '29 Ford or Custom pick up kit.

TEMPTATION Decal is on the "MISC. PARTS PAGE"

SOX & MARTIN GATE CITY Decal.

Contact Nikki at: poppawheelie65@yahoo.com for the "Jakes Speed Equipment" & "UFO" decal.
If your building the Jakes Speed Equipment you must take a scale 8" out of the rear in the middle of the trunk.
It also has no cowl as the injectors set 1" away from the glass. This info. comes from the crew chief: Jet Townsend.

"THE VIRGINIAN" decal.

Scott Kapellusch built this from a resin model.

Doug Schultz built this from a resin model.

Ron Ramsay built this from a resin model.


 

Cecil Yother's
MELROSE MISSILE
1965 PLYMOUTH TOPLESS ROADSTER


" APPROVED & AUTHORIZED BY CECIL L. YOTHER "


#SC- 36 ..... $
56.00

THIS ITEM IS CURRENTLY OUT OF PRODUCTION.
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB Topless Roadster Body, Chassis, Hood, Interior Tub, Dash,
Separate Grill (w/ block-out head lights), Front & Rear Bumpers & Taillights.

Recommended donor parts:
#SC-109 426 Hemi Engine
#SC-102 Drag Racing Driver Figure #2
#SC-90 Chrysler Dana 60 Rear End
#SC-82 A-100 Lightweight Super Stock Seats
#SC-45 AFX (low profile) Blue Streak Drag Slicks
#SC-57 S/S Cragar Rear Mag Wheels (for later version)
#SC-3 Reversed Halibrand Mag Wheels (for early version)
#SC-87  Inner Rims (deep dish)
#SC-72 AFX - Super Stock Skinny Front Tires
#SC-39 American 5 Spoke Front Mag Wheels
#SC-5 Hemi Hilborn Intake Manifold
#SC-25 10" Injector Stacks
#SC-7 AFX Parts Pack - For:
Push Button Transmission Console, Tachometer, Gas Cap, Fuel Pump, Master Cylinder, Timing Balancer Pulley & Steering Box.
#SC-64 Funny Car Parts Pack
#SC-56 Parchute Assortment Pack

*Use any Lindburg '64 Plymouth or '64 Dodge for a donor kit. (The Dodge works best for firewall and inner wheel wells).

*You can re-set the height of the front end by adding plastic blocks as "risers" to the kit suspension.

MELROSE MISSILE decals.

Virgil Stanbary built this from a resin model.


 

1966 BARRACUDA LONG NOSE AWB FUNNY CAR





#SC-11 ........ $
54.00

THIS ITEM IS CURRENTLY OUT OF PRODUCTION.
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB Body, Interior Tub / Chassis, Dash (with extended console), Front Frame Clip
(with battery & motor mounts), Hood, Grill (with blocked out headlights), Flat Grill insert & Separate Front Bumper.

Recommended donor parts: (For Sox & Martin Cuda)
#SC-109 426 Hemi Engine
#SC-118 Drag Racing Driver Figure #1
#SC-102 Drag Racing Driver Figure #2
#SC-55 Front Leaf Spring Assortment Pack
#SC-90 Chrysler Dana 60 Rear End
#SC-75 Goodyear Blue Streak Skinny Front Tires
#SC-39 American 5 Spoke Front Mag Wheels
#SC-5 Hemi Hilborn Intake Manifold
#SC-25 10" Injector Stacks
#SC-7 AFX Parts Pack
#SC-64 Funny Car Parts Pack

*Use a Model King "Hemi Under Glass" for Motor, Glass & Interior parts.
*You may need another donor or "parts box" parts for front & rear suspension.
*The last 3 photos show the un-stretched cars...The Yankee Peddler, the early Sox & Martin and the Phantom Cuda.
You will need to remove 11 scale inches (11 mm on a ruler) from the 1/4 panels, hood & frame to accurately make those versions.
*See "MODEL NEWS" page for instructions on how to make a front tube straight axle.

Has the Sox & Martin "Baccaruda" decals.

Contact Nikki at: poppawheelie65@yahoo.com for the "PANDEMONIUM" Barracuda decals.

Ron Ramsay built this from a resin model.

Scott Kapellusch built this from a resin model (front clip was altered to be stock length).


 

Al Vander Woude's
FLYING DUTCHMAN

CHARGER III FUNNY CAR





This is not a copy of the incorrect mpc kit.

Our model has been re-mastered with new accurate:
*B- pillars
*Lengthened body
*lengthened chassis rails
*Rear wheel well flared
*Front wheel wells moved forward
*Made into a 1-piece upper body
Visit the "IN PROGRESS" (page 2) for details on this new re-styled master.


#SC- 12 ...... $
50.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model comes with new accurate: AWB Body, Floor Pan, Interior Tin, Fire wall,
Rear Hinge, 2- Corrected Frame Rails, Splash Pan, Rear Valence, & Roll Bar.

Recommended donor parts:
#SC-109 426 Hemi Engine
#SC-102 Drag Racing Driver Figure #2
#SC-90 Chrysler Dana 60 Rear End
#SC-85 American "TORQUE THRUST" 16" Deep Dish Mags
#SC-87  Inner Rims (deep dish)
#SC-108 Torque Thrust "Spindle Mount" Mag Wheels
#SC-99 Goodyear Blue Streak 16" Drag Slicks
#SC-75 Goodyear Blue Streak Skinny Front Tires
#SC-64 Funny Car Parts Pack-
4 port Injector Hat, Blower Pulleys, Idler Adj. Arm, Oil Filter, Fire Extinguisher, Airheart Disk Brakes.
#SC-7 AFX Parts Pack
- (2) Gas Caps, Fuel Pump.
#SC-11 GMC 6-71 Blower
#SC-83 Ribbed Blower Belt

*Recommended donor kits: the Model King Kenz & Leslie Cougar Funny Car or the GTO Funny Car.

*Glass can be made using clear plastic sheet.

*Visit the "MODEL NEWS" page for instructions on how to install window glass from clear sheet plastic.

THE FLYING DUTCHMAN Charger III decals.


 

1966 DART LONG NOSE AWB FUNNY CAR


#SC-29......... $
56.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB 1966 Dodge Dart Funny Car Body (with Semi-Hollow door handles),
Square Tube Chassis, Interior tub, Front grill, F&R Bumpers, Taillights & 2- Left & Right "Rear Patch Panels".

Recommended donor parts:
#SC-102 Drag Racing Driver Figure #2
Check out the "PARTS PAGE" for any Tires, Slicks, Mag Wheels, Rear End, Wheelie Bars or other parts you may need.

*Every Dart Funny Car had some differences .... (wheelbase, long nose / short nose, stock bumper, cut bumper, etc)
You will need to make some alterations to build an individual car, although with this model, any one of these cars can be built.

*Two rear "PATCH PANELS" are supplied to do the rear wheel alterations if needed ?
Some of the cars ran stock location rear wheel wells.

*Chassis was designed to use Amt/Ertl Funny Cars for front & rear suspension, but will also except other suspensions
with some minor modification.

*For a pose able front axle... Use a dropped axle from a Revell '51 Ford Angelia, '51 Henry J, '29 Ford or Custom pick up.

*See "MODEL NEWS" page for instructions on how to make a front tube straight axle.

*Visit the MODEL NEWS page for "HOW TO" tips on: "Flip Front-End".

Click on photo for a printable instruction sheet to do any alterations.

Loren Bussewitz built this from a resin model.

Ron Ramsay built this from a resin model.
Scott Kapellusch built this from a resin model.
Scott Kapellusch built this from a resin model.
Jim Polli built this from a resin model.

Has these decals for our Long Dart Funny Car-
*Charlie Allen's PURPLE TERROR
*Charlie Allen's ATLANTIC FLYER
*The FLYING DUTCHMAN Topless Dart
*Gene Snow RAMBUNCTIOUS
*Rambunctious Interior MACHINE TURN decals


 

1966 PLYMOUTH VALIANT AWB FUNNY CAR
HAIRY CANARY


Approved and Authorized by Rick Williamson - Owner of "The HAIRY CANARY" !


#SC-28 .......... $56.00

Mastered from an original '66 Plymouth Valiant promo model.
" We guarantee this to be the only correct "HAIRY CANARY" ever offered "

THIS ITEM IS CURRENTLY OUT OF PRODUCTION.
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB '66 Valiant Body, Hood, Interior Tub, Square Tube Chassis,
Grill (with block-out Headlights), Grill Insert, Steering Column Box (with gauges), Bumpers & Taillights.

*Although hard to see in the photo, the side chrome body trim is there, along with all the correct sail panel moldings.
This kit was designed to build both (early & later versions).

Recommended donor parts:
#SC-102 Drag Racing Driver Figure #2
#SC-91 Buick / Olds/ Pontiac Rear End
#SC-55 Front Leaf Spring Assortment Pack (for 1/4 elliptical springs used on rear axle)
#SC-45 AFX (low profile) Blue Streak Drag Slicks
#SC-40 American Racing 15" Rear Mag Wheels
#SC-87  Inner Rims (deep dish)
#SC-75 Goodyear Blue Streak Skinny Front Tires
#SC-39 American 5 Spoke Front Mag Wheels
#SC-69 Hilborn Bug Catcher
#SC-56 Parchute Assortment Pack
#SC-66
392 Hemi Engine
#SC-50 M/T 392 Hemi Valve Covers
#SC-11 GMC 6-71 Blower
#SC-83 Ribbed Blower Belt
#SC-64 Funny Car Parts Pack

*To build the later version (lowered & set back engine) you will need to cut out part of the firewall & floorboard,
and build an L-shaped box in the interior tub to surround the engine. You will also need to re-set the transmission mount.

*A Model King AWB Funny Car kit will supply the suspension & interior parts.

*For a poseable front axle.....Use a dropped axle from a Revell '51 Ford Angelia, '51 Henry J, '29 Ford or Custom pick up, kit.

HAIRY CANARY decals.

Bill Duval built this from a resin model.

Scott Kapellusch built this from a resin model.


 

1965 BARRACUDA "REAR ENGINE" FUNNY CAR





#SC-21 .......... $56.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

This new redesigned chassis, wheel base & Interior tub actually fits !........ (unlike the original kit)

* Mock-up model above has Model King "Hemi Under Glass" donor suspension parts *

Resin model includes: Correct Body, Hood, New Rear Engine Chassis, New Interior Tub, Grill & Bumper,
Grill Insert, Valance, Rear Bumper & Taillights.

*Model King" HEMI UNDER GLASS" is all you need for a donor kit.

Recommended donor parts:

"HEMI UNDER GLASS VERSION"
#SC-109
426 Hemi Engine
#SC-43
Goodyear 15" Drag Slicks
#SC-89
Chrysler 8 3/4 Rear End
#SC-65
Hurst Mag Wheels
#SC-87
 Inner Rims (deep dish)
#SC-72 AFX- Super Stock Front Racing Tires
#SC-7 AFX Parts Pack
#SC-64 Funny Car Parts Pack
#SC-118 Drag Racing Driver Figure #1

"TOM McEWEN VERSION"
#SC-109 426 Hemi Engine
#SC-11 GMC 6-71 Blower
#SC-83 Ribbed Blower Belt
#SC-43 Goodyear 15" Drag Slicks
#SC-87  Inner Rims (deep dish)
#SC-89 Chrysler 8 3/4 Rear End
#SC-75 Goodyear Blue Streak Skinny Front Tires
#SC-7 AFX Parts Pack
#SC-64 Funny Car Parts Pack
#SC-56 Parchute Assortment Pack ( HEMI CUDA has dual chutes)
#SC-102 Drag Racing Driver Figure #2

"FRED GOHSKE VERSION"
#SC-109 426 Hemi Engine
#SC-11 GMC 6-71 Blower
#SC-83 Ribbed Blower Belt
#SC-99 Goodyear Blue Streak 16" Drag Slicks
#SC-79 Halibrand (shallow dish) 16" Mag Wheels
#SC-88 Inner Rims (shallow dish)
#SC-89 Chrysler 8 3/4 Rear End
#SC-75 Goodyear Blue Streak Skinny Front Tires
#SC-7 AFX Parts Pack
#SC-64 Funny Car Parts Pack
#SC-56 Parchute Assortment Pack ( FRED GOSKE has dual chutes)
#SC-102 Drag Racing Driver Figure #2

Tom McEwen PLYMOUTH DEALERS Hemi Cuda
HURST HEMI UNDER GLASS decals

Damian Fontes built this from a resin model.

Ron Ramsey built this from a resin model.

Scott Kapellusch built this from a resin model.


 

Gene Snow's
RAMBUNCTIOUS
1965 DODGE DART AWB FUNNY CAR



This was the 1st resin model made for Speed City. Put into production on June 7 2006.
In 2009 it was upgraded with correct AWB chassis/ Interior floor, firewall,
front frame clip, door panels
& stock front wheel wells.


#SC-1....... $57.00

THIS ITEM IS CURRENTLY OUT OF PRODUCTION.
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct AWB Body, Hood, Grill, Chassis with Interior Floor,
Firewall, Door Panels, Dash, Front Frame Clip, Taillights & Rear Bumper.

Recommended donor parts:
#SC-109 426 Hemi Engine
#SC-118 Drag Racing Driver Figure #1
#SC-89 Chrysler 8-3/4 Rear End
#SC-55 Front Leaf Spring Assortment Pack
#SC-82 A-100 Lightweight Super Stock Seats

#SC-71
15" Pie Crust Slicks
#SC-39 American 5 Spoke Front Mag Wheels
#SC-87  Inner Rims (deep dish)
#SC-75 Goodyear Blue Streak Skinny Front Tires

#SC-40 American Racing 15" Rear Mag Wheels
#SC-5 Hemi Hilborn Intake Manifold
#SC-24 15" Injector Stacks
#SC-7 AFX Parts Pack
#SC-56 Parchute Assortment Pack

*Front suspension... use a dropped axle from a Revell '51 Ford Angelia, '51 Henry J, '29 Ford or Custom pick up, kit.

*Rear suspension.....use a amt/ertl '71 duster


*Real car was painted metallic burgundy, close color match is PACTRA RC67 met. burgundy

"SCALE MODELING BY CHRIS" has the RAMBUNCTIOUS decals for this kit.

Doug Schultz built this from a resin model.

Scott Kapellusch built this from a resin model.

Rick Shepard built this from a resin model.


 

Charlie Allen's
PURPLE TERROR

1965/'66 DODGE DART FUNNY CAR



#SC-2......... $
55.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: s
kmodeler@sbcglobal.net

Resin model includes: Correct AWB '65 Dart Body (with a '66 Dart Front clip), Chassis / Interior Tub (with fire wall,
Floor & door panels), Dash & Cowl (with scoop), Square tube frame extension (with motor & fuel tank mounts), Front leaf springs, Grill, Front & Rear Bumpers.

Recommended donor parts:
#SC-109 426 Hemi Engine
#SC-118 Drag Racing Driver Figure #1
#SC-89 Chrysler 8-3/4 Rear End
#SC-82 A-100 Lightweight Super Stock Seats
#SC-57
S/S Cragar Rear Mag Wheels
#SC-87  Inner Rims (deep dish)
#SC-72 AFX - Super Stock Skinny Front Tires
#SC-34 S/S Cragar (zero offset) Front Mag Wheels
#SC-5 Hemi Hilborn Intake Manifold
#SC-24 15" Injector Stacks
#SC-7 AFX Parts Pack
#SC-56 Parchute Assortment Pack

*Recommended Donor Parts: For rear suspension use- amt. '71 Plymouth Duster 340.
For Slicks use- 9" slicks found in older AMT. kits.

*Paint: Real car was painted Metallic lavender !
Close paint match is: mix 1 full bottle of Colors by BOYD # 52704 GRAPE PEARL - with 3/4 of a bottle of Testors SILVER.

*Use 3/32" Plastic tube for front tube axle.

*See "MODEL NEWS" page for instructions on how to make a front tube straight axle.

Click on photo for new Flip Front-End Instructions.

Charlie Allen's PURPLE TERROR decals.

Steve Tribbey built this from a resin model.

Doug Schultz built this from a resin model.

Scott Kapellusch built this from a resin model.


 

1966 DODGE DART
(170 - 270 - G/T)



The only '66 Dodge Dart in model history !

Never before seen in 1/25 scale, until now.
*This can also be built as a factory style '66 Dodge Dart Promo Model *



#SC-9........ $58.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net

Resin model includes: Correct Body, Promo Style Chassis, Interior tub, Dash, Steering wheel, Grill, Bumpers & Tail lights.

Recommended donor parts:
SC-75 *FUNNY CAR* Goodyear Blue Streak Skinny Front Tires
(These tires are smaller in size , so they look like 14" compact car tires)
(See photo)

BUILDING TIPS
*The hood can easily be cut out, By scribing it with the back of an X-ACTO knife, for a detailed motor.
*Steel wheels & dog dish hub caps are in the Lindburg "LITTLE RED WAGON".
* Hub caps look to be the closest match to '66 Dart hub caps can be found in the MPC 1967 OldsToronado.
*6 cylinder engine can be found in the Lindburg '64 Plymouth Belvedere.
* For a detailed chassis.... Use the amt/ertl '71 Plymouth Duster.
* Use ALCLAD II LACQUER CHROME #ALC107 (or) MOLOTOW
30 ml. refill bottle.
(Molotow chrome can be poured into an air brush to simulate chrome on Bumpers, Taillights & Grill)
*For actual Chrome Plating, send parts to: CHROME-TECH USA

Decals for stock Dart & G/T style emblems,scripts & moldings are available through Keith Marks.
Click on decal for link


Decal includes: 170 - 270 & G/T style markings

Original vintage color's for all makes and models..... Comes in bottles and spray cans.

Lars-Olof Gustavsson built this from a resin model.
Scott Kapellusch built this from a resin model.

Mark Mucciacciaro built this from a resin model.


 

1970 /'74 CUDA FUNNY CAR BODY




Chuck Boerner is selling new decals for the cars on the bottom row, you can contact him at: stang1forever@yahoo.com
Or search eBay name..... cboerne


#SC-23 ...... $35.00

OUT OF STOCK, DO NOT ORDER !
If you want to be placed on a waiting list for this item, send me an email: skmodeler@sbcglobal.net



Use any Polar Lights Charger or Barracuda Funny Car for donor..... Chassis, Motor & Interior parts.

Check out our "PARTS PAGE" for any Tires, Slicks, Mag Wheels, Rear End, Driver Figure or other parts you may need ?

Has the KING FISH CUDA decal.
Nostalgia (60's & 70's) Funny Car Grill & Headlight Sheet
DON SCHUMACHER ( INDY WINNER ) '70 CUDA decal
DON SCHMACHER '72 CUDA decal
BIG JOHN decal
DAM YANKEE decal (out of production)
DUNN & REATH decal
CANDIES & HUGHES decal
ROLLIN' STONED decal
STARDUST decal
KEYSTONE KUDA decal


All rights reserved. Do not copy any Speed City Resin bodies or parts without permission and consent.